Pocket Wizard Mini TT1 for Canon or Nikon


 

______________

 

The Pocket Wizard Mini TT1 Transmitter is the start of a new era in wireless trigger control.

 
______________
 


Above: An urban portrait shot taken with the new Pocket Wizard TTL system.

 

Need more speed?  Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically.  No buttons to press or settings to change other than your shutter speed will give you flash sync all the way to 1/8000th.  

A new PocketWizard Utility program is provided to support the MiniTT1 via a USB port.  The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware.

Flex TT5: For more information click here.

Pocket Wizard Mini TT1 for Canon or Nikon

Canon TT1 RRP £215.00 - Lovegrove price £203.30

The New Shape of Wireless Freedom.

The smallest PocketWizard radio ever, the Mini TT1 Transmitter locks onto the camera’s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard Flex TT5 Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras.

* Dedicated E-TTL II Triggering

* Manual Power Control

* HyperSync™

* Upgradeable ControlTL™ Firmware                               

* Low Profile Design

The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot.  The new PocketWizard ControlTL™ System interprets the complex E-TTL II data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal.

Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash.  Adjust your shutter speed, aperture or ISO and the system corrects for those changes.  A ratio command set on the flash or command unit passes through the Mini TT1 to set the remotes. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight.  Now you can deploy a wireless flash system wherever you want, without infrared limitations, in seconds.Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX.  When used this way with a digital camera, you can take advantage of PocketWizard’s HyperSync Technology that allows up to 1/500th of a second camera sync with many camera/strobe set-ups.  HyperSync allows you to advance the timing of your flash trigger so that faster than X-sync speeds can be achieved. Damien Lovegrove regularly shoots at 1/4000th second at f/4 for instance.

Order your PocketWizard MiniTT1 and FlexTT5 here

Mega Deal: Order our 2x Flex TT5 + 1x Mini TT1 PocketWizard deal and save over £105 off of the RRP.


PocketWizard® Mini TT1 for CANON
Availability:
Price: £203.30
 ( £173.02 excl. VAT )
 
P&P from: £11.75 (Insured post)

PocketWizard® Flex TT5 for CANON
Availability:
Price: £209.45
 ( £178.26 excl. VAT )
 
P&P from: £11.75 (Insured post)

PocketWizard® 2x Flex TT5 for CANON - Multibuy Deal
Availability:
Price: £398.50
 ( £339.15 excl. VAT )
 
P&P from: £12.95 (Insured post)

PocketWizard® Flex TT5 & Mini TT1 for CANON - Multibuy Deal
Availability:
Price: £393.35
 ( £334.77 excl. VAT )
 
P&P from: £12.95 (Insured post)

PocketWizard® MEGA DEAL - 2x Flex TT5 + 1 Mini TT1 (CANON)
Availability:
Price: £569.00
 ( £484.26 excl. VAT )
 
P&P from: £12.95 (Insured post)
Mini TT1 Specification:

TTL Compatibility

Canon E-TTL II

Model No:

TT1-C-CE

Frequency:

433 MHz

Channels:

52 Channels over 26 Frequencies

Antenna:

Internal

Transmit output power:

Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)

Range Performance:

30 to 800 feet (10 to 240 meters) for E-TTL II triggering depending on flash used, antenna orientation and other variables.

30 to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.

Mounting:

Hot-shoe only

Maximum Shooting Rate:  Frames per Second (fps)

8 fps for E-TTL II & normal triggering

Power / Channel Switch:

OFF - C.2 - C.1

Status Indicator:

LED, Green, Amber, Red status indications

Voltage Present:

3.3 VDC (all pins) - safe for all cameras

Hot Shoe voltage protection

Hot Shoe: up to 50V

USB:

USB Compliant 2.0, Mini-B Connector

Operating Temperature:

above -15C (5 F) and below 50 C (120 F)

Storage Temperature:
(without battery)

above -30 C (-22 F) and below 85 C (185 F)

Construction:

High impact plastic, captive battery door
Hot shoe made of glass reinforced resin

Power:

3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type

Battery Life:

Hundreds of hours of camera "awake time" depending on shooting habits

Dimensions:

2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall

Weight:

2.3 oz (65 grams), 2.0 oz (57 grams) without battery

Included in the box:

MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide, 2 year guarantee

Features:
ControlTL™: PocketWizard firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability.

Dedicated E-TTL II Triggering: Full autoflash exposure control with the freedom and reliability of a PocketWizard radio. 

Manual Power Control: Now you can work with total control with your remote lights, without leaving your shooting position.

Basic Trigger Mode: Allows the Mini TT1 or Flex TT5 to work as a transmitter on ANY camera it will fit.  The Mini TT1 and Flex TT5 are completely reverse compatible with all previous PocketWizard equipment.

Power Tracking:  Change your control settings on your flash or camera and the system automatically adjusts.

HyperSync™:  HyperSync allows photographers to achieve faster X-sync speeds, up to 1/500th second, with full power flash. 


FP/High Speed Sync:  Push your ControlTL system beyond 1/500th and sync all the way to 1/8000th.

Built-in Hot Shoe: 
Dedicated hot shoe and no more cords.
Compatibility:

The MiniTT1 is compatible with these Canon cameras:
1D Mark III, 1Ds Mark III, 1D Mark II, 1Ds Mark II, 1D Mark II N
5D, 5D Mark II
20D, 30D, 40D, 50D
Rebel XT/350D, Rebel XTi/400D, Rebel XS/1000D, Rebel XSi/450D

E-TTL II is compatible with these Canon flashes:
430EX - (range 30m)
430EX II - (range 100m)
580EX - (range 30m)
580EX II - (range 30m)

Become a member | About Us | Contact Us | Blog | Twitter | Site Map | Copyright © Lovegrove Consulting 2009